
For wooden and plastic golf tees
$7.00
A pocket gauge with stepped slots from 0.5 to 2.5 in, so you push the tee in to the same height every time.
Bank cardSlide the tee into the step for the height you want and push down until the gauge sits on the turf. The designer marked the steps in inches, from 0.5 to 2.5.
77 x 32 mm (3 x 1.25 in) and 6 mm thick. It is printed in one color, so the numbers are raised or sunk into the surface instead of being a second color.
| Piece | Qty | Size of one | Weight of one |
|---|---|---|---|
| Tee setter | 1 | 76.8 × 31.8 × 6.3 mm3 × 1.3 × 0.25 in | 9.1 g0.3 oz |
Sizes are measured from the design files. Weights are estimates for ASA.
This part is printed from Golf Tee Height Setter, Inches by FunkyNuggets, licensed under CC BY 4.0. Thank you to the designer for sharing it.
We print it as published, with no changes to the design.

For cap and visor brims, standard golf tees

For alignment sticks 10 mm (3/8 in) across, two tees as ground anchors

For standard golf balls, 42.7 mm (1.68 in), flat ball markers, three standard tees as legs

For ball marks on the green

For standard golf balls, 42.7 mm (1.68 in), belts and waistbands